Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,761. Welcome to our newest member, AnicaLin
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Lindsay AirGraver Info - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 02-06-2009, 01:20 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Engraving Videos ~ 11 hours worth

NOTE: This page takes a while to load since there are so many videos. Wait for it.

I hope this will work. Here are all of videos in sequence order that I had made of the SR Johnson pearl handle fighter. Approx 11 hours of videos. I found two more tapes that may have more on them. I'm pretty sure I had recordered some of the gold inlay process but they aren't in any of these. I hope it is on one of the extra found tapes. My video8 player died though and I'll need to find another to see what is on the other tapes.

Here is a completed picture of the project.


______________________________________________
Initial outline cutting










______________________________________________
Recutting
















______________________________________________
Recutting and removing background



























______________________________________________
Shading with some gold shading

























______________________________________________
Shading Pins












______________________________________________
Shading Gold



























______________________________________________
Completing and signing















__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #2  
Old 02-06-2009, 01:47 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours

These are the videos that go with the Cut a practice plate together online thread. Engraving is with the PalmControl.
There are 13 of them.



__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #3  
Old 02-06-2009, 02:06 AM
rbaptiste's Avatar
rbaptiste rbaptiste is offline
Platinum
 
Join Date: Nov 2007
Location: Modave (Belgium)
Posts: 1,133
Default Re: Videos ~ 11 hours

Hi Steve, it is very interresting, do you have the video when you make the gold inlay?
__________________
http://rbaptiste.com
Reply With Quote
  #4  
Old 02-06-2009, 06:55 AM
CarlW's Avatar
CarlW CarlW is offline
Platinum
 
Join Date: Oct 2008
Location: Diamondhead, MS
Posts: 285
Send a message via AIM to CarlW
Default Re: Videos ~ 11 hours

Many Thanks Steve.
This is just what us newbies need. I know I will spend a lot of time reviewing the videos time an again, until it soaks in, as will others I am sure.
Carl
__________________
Carl Wallace

Life Member NRA
FEGA Member
Reply With Quote
  #5  
Old 02-06-2009, 08:09 AM
greyback greyback is offline
Steel
 
Join Date: Jan 2009
Location: the land of sky blue waters
Posts: 26
Default Re: Videos ~ 11 hours

This is great stuff. Thanks a million for all the work you do. The only thing is; I can't hear it. I've got the volume cranked up to maximum and can barely make out a word. Is this just my computer or has anyone else had it happen?
Reply With Quote
  #6  
Old 02-06-2009, 11:33 AM
SVD's Avatar
SVD SVD is offline
Platinum
 
Join Date: Mar 2008
Location: Kansas City, MO
Posts: 2,555
Default Re: Videos ~ 11 hours

I haven't checked this set (can't see them through the Firewall Of Idiocy at work) but if you're hearing the graver purr then the volume's probably ok.

From what I've seen Steve doesn't talk to himself that much when he engraves.
__________________
Enjoy!

Steve :->
(KCSteve in most forums)
SVD's Photo Album
Reply With Quote
  #7  
Old 02-06-2009, 01:49 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours

Roland, I found two more tapes that may have more of the knife engraving on them. I'm pretty sure I had recordered some of the gold inlay process but they aren't in any of the above videos. I hope it is on one of the extra found tapes. My video8 player died though and I'll need to find another to see what is on the other tapes.

Greyback, In a few of what I labeled "initial outline cutting" I spoke a little. See if you can use that to adjust the volume. Also where I was using the rotary tool in the background removing videos.. see if you can hear and adjust the volume there. My older desktop computer doesn't put the sound volume out as well as my laptop. I can hear the finer shading videos better with the laptop.

__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #8  
Old 02-06-2009, 10:17 PM
rod rod is offline
Platinum
 
Join Date: May 2006
Posts: 623
Default Re: Videos ~ 11 hours

Steve,

This could be the best organized show and tell engraving video reference on the internet!

Thank you for taking the time to post it in such a convenient manner.

Of course the project design and execution are exquisite!

best

Rod
Reply With Quote
  #9  
Old 02-08-2009, 09:33 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours

Thanks Rod, I hope it does help. There are more videos I've been meaning to upload too. One is of Gene Clark's watches. Now that there is a way to organize them it should make it easier.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #10  
Old 02-09-2009, 01:42 PM
Stanley M. Cwierz Stanley M. Cwierz is offline
Copper
 
Join Date: Feb 2009
Posts: 3
Default Re: Videos ~ 11 hours worth

Well Gang,
Here I am in Cottonwood AZ, taking classes (Engraving - 2nd Semester- Ms. Rachel Wells) at CETEC - Yavapai College, Prescot Valley AZ. This is a long drive for me - three time per week and trying to hold a job.
If I may say - I find the forum / cafe fantastic. In the last few days I have learned more thru this site the I have for a while. During the time that I am in it, I will try to participate as much as possible.

God Bless,

Stan
Reply With Quote
  #11  
Old 02-09-2009, 03:28 PM
airamp airamp is offline
Platinum
 
Join Date: Mar 2008
Location: Scottsdale, Az.
Posts: 684
Default Re: Videos ~ 11 hours worth

Hi Stanley,

Glad to see you decided to enjoying this great forum and all the great information it has.

Welcome.

Don't forget to let your classmates know of this forum and let them know they are also welcome to join.

AirAmp
Reply With Quote
  #12  
Old 02-09-2009, 11:34 PM
kcrutcher kcrutcher is offline
Platinum
 
Join Date: Dec 2007
Posts: 397
Default Re: Videos ~ 11 hours worth

Steve

I just finished viewing the, Initial cutting of the SRJ knife videos.

It is so great to be able listen to your thoughts and comments as you are cutting.

This another complete and helpful diminution.

Thanks very much.

Ken
Reply With Quote
  #13  
Old 02-10-2009, 11:21 AM
LonglineCharlie LonglineCharlie is offline
Copper
 
Join Date: May 2006
Location: Fairland, IN
Posts: 4
Default Re: Videos ~ 11 hours worth

Hello Fellow Engravers
I am a new Engraver. I am 67 and have been in the hospital 4 times since halloween. Ha Might be the shortest engraver in history. Ha. Anyway I am much closer to buying a Push Engraver from Steve. I know it has to be the best Engraving invention of the era and Steves Website, schools, His Help sites He is giving to Us for free who are not artists but merely mechanics deserves to be the Humanitarian award of the century to us. Thank You Steve for all of the help you have given to Me and many others just like me who thought you had to be an artist to do great engraving.
I live in Fairland, Indiana and would be glad to help anyone who would like to come to my house to see basic engraving to get you started. Yu cannot do it without tools but you can do it with cheap tools. I will show you how I did it. Sincerely Charlie
Reply With Quote
  #14  
Old 02-10-2009, 03:00 PM
Debi Debi is offline
Copper
 
Join Date: Nov 2008
Posts: 1
Default Re: Videos ~ 11 hours worth

Steve,
What a wonderful tutorial! Thank you so much for sharing your beautiful work and guiding in my "learning" process.
You are truely a Master and an inspiration.
Debi R.
Reply With Quote
  #15  
Old 03-01-2009, 09:00 PM
Jeff Talbert Jeff Talbert is offline
Copper
 
Join Date: Feb 2009
Posts: 5
Default Re: Videos ~ 11 hours worth

Steve,

I'm curious about how the gold inlay is done. I have done silver inlay one time on a spider front site on a flintlock shotgun. This was done by undercutting the edges of the inlet and hammering the slightly thicker silver site into the inlet, locking it in. I'm wondering how your method differs, since it would seem that recutting the design as you do, following the seam of the two metals would destroy the joint and release the inlay, if done by the method I used.
I'd love to see the video of the inlay process, if you find it.

Thanks,
Jeff
Reply With Quote
  #16  
Old 03-01-2009, 10:26 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours worth

Thank you for the nice comments everyone on the videos. There are still those watch video's that I've been meaning to upload and add to these.

Hi Jeff, The gold inlay pockets are cut away using the airdrill similar to the way I am cutting background out in these videos. After the pocket is made I undercut with a reshaped dental bur. It is like the smaller one I use in the videos but ground slightly smaller. I have described the process in the "cut a practice plate together" thread.
http://www.engravingforum.com/showthread.php?p=6877

Another way to undercut is how Raland Baptiste does it. We made a template for his undercut chisel.
http://www.engravingforum.com/showthread.php?t=2312

Of course a third way to undercut is with a graver. For staight line borders and such this is almost faster. For me it is tougher going around inside corners though. Make a knife edge shaped graver and place a tiny flat heel on for this. It basiclly makes a tiny flat. Here is a pic of that point...
http://www.handgravers.com/images/graver-flat.jpg

Still another way that can work for small inlay lines that are tough to get in to undercut is to use the same point in the above picture and jab in hooks at the bottom of the line. Be careful the hooks don't raise above the surface or you'll see white dots in the gold line after sanding flush.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #17  
Old 03-02-2009, 06:05 PM
Jeff Talbert Jeff Talbert is offline
Copper
 
Join Date: Feb 2009
Posts: 5
Default Re: Videos ~ 11 hours worth

Steve,

Thanks for the very detailed reply. The key bit of info that had me puzzled was solved by your diagram showing the thickness of the gold, and that it is anchored below the depth of the engraving cuts.

Thanks
Jeff
Reply With Quote
  #18  
Old 03-07-2009, 09:07 AM
Baygraver's Avatar
Baygraver Baygraver is offline
Steel
 
Join Date: Mar 2008
Location: Berkeley, California
Posts: 68
Default Re: Videos ~ 11 hours Going to the well...

Quote:
Originally Posted by rod View Post
Steve,

This could be the best organized show and tell engraving video reference on the internet!

Thank you for taking the time to post it in such a convenient manner.

Of course the project design and execution are exquisite!

best

Rod
Steve,

I think this is unquestionably the best resource on the web for seeing and learning engraving.

I hope you leave this prominently available for a long time as it continues to illuminate.

Regards, Jim
Reply With Quote
  #19  
Old 03-22-2009, 09:41 AM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Thumbs up Re: Videos ~ 11 hours worth

Hi Steve,
The videos are very interesting.A lot of work for you but a delight for me hence, thanks a lot.
I would like to know which gravers did you use for initial cutting and recutting?
Regards
Mohd
Reply With Quote
  #20  
Old 03-22-2009, 07:38 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours worth

Thanks for the nice comments everyone.

Hi Mohd, I used a universal template width graver (116 degrees) for initial cutting, recutting and shading too.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #21  
Old 04-07-2009, 08:09 PM
qwasty qwasty is offline
Steel
 
Join Date: Apr 2009
Posts: 18
Default Re: Videos ~ 11 hours

Quote:
Originally Posted by SVD View Post
From what I've seen Steve doesn't talk to himself that much when he engraves.
Darn, I was hoping for happy little trees, bubbling brooks, and maybe an afro haircut (Bob Ross was my childhood hero, along with the guy in the cape on my underpants, hehe).
Reply With Quote
  #22  
Old 07-01-2009, 09:39 AM
Willem Parel's Avatar
Willem Parel Willem Parel is offline
Platinum
 
Join Date: Jun 2009
Location: the Netherlands
Posts: 607
Default Re: Videos ~ 11 hours

Thanks Steve, This is what a beginner needs, like Carl said we will watch them over and over again.
What I noticed and what's wondering me, I don't see you re-grip your vise with making a long spiral engravingline.
It go's smooth in one move, what's your secret about that.

Willem
Reply With Quote
  #23  
Old 07-01-2009, 11:31 AM
SVD's Avatar
SVD SVD is offline
Platinum
 
Join Date: Mar 2008
Location: Kansas City, MO
Posts: 2,555
Default Re: Videos ~ 11 hours

I don't know if it's how Steve does it, but I took a class from Lee Griffithsand he'll start with his fingertips on the ball and end up with it in the crook of his elbow - maybe higher.

He starts off turning it normally but if he runs out of 'hand' he just lets go and uses his forearm to keep it turning.
__________________
Enjoy!

Steve :->
(KCSteve in most forums)
SVD's Photo Album
Reply With Quote
  #24  
Old 07-14-2009, 06:56 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours

Quote:
Originally Posted by Willem Parel View Post
Thanks Steve, This is what a beginner needs, like Carl said we will watch them over and over again.
What I noticed and what's wondering me, I don't see you re-grip your vise with making a long spiral engravingline.
It go's smooth in one move, what's your secret about that.

Willem
Hi Willem, Sorry, I missed your question. Past the range of motion with my writst I walk my fingers on the vise to keep going round and round.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #25  
Old 09-01-2009, 09:09 AM
tsp tsp is offline
Copper
 
Join Date: Sep 2009
Location: capon bridge,wv
Posts: 2
Default Re: Videos ~ 11 hours worth

i have been watching your 11-hr vids there great. do u have any vids or info on how to apply the gold? and do u have info on teaching the bulino engraving method that u did on that shotgun on your guns page? thanks tsp.
Reply With Quote
  #26  
Old 09-01-2009, 09:34 AM
rbaptiste's Avatar
rbaptiste rbaptiste is offline
Platinum
 
Join Date: Nov 2007
Location: Modave (Belgium)
Posts: 1,133
Default Re: Videos ~ 11 hours worth

You can see here
http://www.engravingforum.com/showthread.php?t=3134
__________________
http://rbaptiste.com
Reply With Quote
  #27  
Old 09-01-2009, 04:41 PM
tsp tsp is offline
Copper
 
Join Date: Sep 2009
Location: capon bridge,wv
Posts: 2
Default Re: Videos ~ 11 hours worth

thanks roland, that was just what i was looking for, tsp
Reply With Quote
  #28  
Old 09-01-2009, 11:05 PM
rbaptiste's Avatar
rbaptiste rbaptiste is offline
Platinum
 
Join Date: Nov 2007
Location: Modave (Belgium)
Posts: 1,133
Default Re: Videos ~ 11 hours worth

Perfect ;-)
__________________
http://rbaptiste.com
Reply With Quote
  #29  
Old 12-30-2009, 06:03 PM
mezzotint's Avatar
mezzotint mezzotint is offline
Copper
 
Join Date: Oct 2009
Location: harbeson, delaware
Posts: 2
Default Re: Videos ~ 11 hours worth

Hi, all. John Murray here. Currently living just outside of Milton, DE and am gathering as much info as I can from this excellent site so I can try my hand at a little bit of scratching. I have been doing etching on copper for a long time, and mezzotint as well. (Thats where my login name for this site comes from.) Had the pleasure of meeting Ken Hurst a few years back in Kitty Hawk, NC and remain impressed with his exceptional skill and remarkable kindness. So, now I want to try engraving on a simple, manual push level. Just about ready to order a push handle and some steel and unique sharpening guide with stone.
Honored to be here among so many talented and gifted folks.
I'm going to continue reading and watching these infromative videos tonight and until my order gets here. I need all the help I can get, and am really grateful for any and all suggestions.
My best to all-
John aka (mezzotint)
Reply With Quote
  #30  
Old 12-20-2010, 09:19 AM
Micky Micky is offline
Copper
 
Join Date: Dec 2010
Location: UK
Posts: 3
Default Re: Videos ~ 11 hours worth

Hi I'm new to both this forum and engraving. I'm in the polite term a 'mature' student, which as far as I can see means I missed out on all the excitement first time round. I'm interested in engraving but also progressing to inlay and damascene work as used in historical metalworking. I just can't believe how many useful tips/videos etc are crammed on the site - so many thanks to everyone
Reply With Quote
  #31  
Old 12-21-2010, 09:32 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours worth

Quote:
Originally Posted by Micky View Post
Hi I'm new to both this forum and engraving. I'm in the polite term a 'mature' student, which as far as I can see means I missed out on all the excitement first time round. I'm interested in engraving but also progressing to inlay and damascene work as used in historical metalworking. I just can't believe how many useful tips/videos etc are crammed on the site - so many thanks to everyone
Thanks for posting Micky.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #32  
Old 12-26-2010, 08:24 AM
bildio bildio is offline
Gold
 
Join Date: Dec 2010
Location: MD
Posts: 156
Default Re: Videos ~ 11 hours worth

Hi Steve,

Very nice videos.

I'm interested in how you did the signing. What tool did you use, & what is the height of the letters?

I tried searching, but couldn't find the answer.

Added after more searching: I found it. I don't know how to refer to the actual post/thread, but here's the answer.

"For signing, sometimes I'll cut the letters and other times like in this case since it was a small border to sign on I'll just poke dots with a scribe. The scribe is made from a 1/16" rotary carbide bur sharpened into a point and held in a pin vise. In the video, I am first laying out the letters by lightly scratching them on and then I go back over it and place dots. There is a picture of of the carbide scribe over in the recent bulino thread but it is in a brass tube in the picture."

http://www.handengravingforum.com/showthread.php?t=2484

Thanks,
__________________
Bill

Last edited by bildio; 12-26-2010 at 01:13 PM. Reason: Found answer by more searching.
Reply With Quote
  #33  
Old 01-06-2011, 05:59 AM
Robert Jobe Robert Jobe is offline
Copper
 
Join Date: Jan 2010
Location: oklahoma
Posts: 4
Default Re: Videos ~ 11 hours worth

This my first post on this site. we need more teaching videos on here. Maybe some about lay or gun prep and engraving.
Reply With Quote
  #34  
Old 01-06-2011, 10:29 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours worth

Welcome Robert, There are a lot of videos, tutorials and book links at here: www.engravinglessons.com Scroll down towards the bottom of this page link: http://www.engravinglessons.com/Hand...0Resources.htm
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #35  
Old 01-07-2011, 01:01 AM
nickgraver nickgraver is offline
Steel
 
Join Date: Nov 2010
Location: London UK
Posts: 37
Default Re: Videos ~ 11 hours worth

What a wonderful resource -
Reply With Quote
  #36  
Old 02-25-2011, 09:38 PM
Don Curtis's Avatar
Don Curtis Don Curtis is offline
Platinum
 
Join Date: Jul 2008
Location: New River, Arizona
Posts: 311
Default Re: Videos ~ 11 hours worth

Steve,

When doing these videos which Template(s) did you use for the graver?

And which is the best Template to begin learning with?

Donny
Reply With Quote
  #37  
Old 02-25-2011, 10:16 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours worth

Hi Donny, Used the clear 116 degree Universal template. Here is another tutorial with the basic cuts. Once you have those down, then it is just a matter of using combinations of these cuts to make the various leaves.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #38  
Old 02-26-2011, 08:47 AM
Don Curtis's Avatar
Don Curtis Don Curtis is offline
Platinum
 
Join Date: Jul 2008
Location: New River, Arizona
Posts: 311
Default Re: Videos ~ 11 hours worth

Thank you. Gonna rain here this weekend so I have ME TIME to practice!!

Donny
Reply With Quote
  #39  
Old 07-02-2012, 03:40 PM
jaf506 jaf506 is offline
Copper
 
Join Date: Jul 2012
Location: Minnesota
Posts: 2
Default Re: Videos ~ 11 hours

Steve,
Just found and am browsing your site. Did you ever find the inlaying videos? I'd be interested in seeing the technique you use. I'm only a newbie, but it's on my list of things to try. For the larger areas that were gold inlay, are they only held in place by undercutting the edges, or do you crosshatch the inlay underlayment with a raised burr to help hold the gold, which is what I believe Meeks suggests? Your videos are a great example of the process, and like everyone else here, I'd like to thank you for putting them up. Is there a picture somewhere of your overall engraving workspace? Looks like you work under a 'scope a lot. Or is that just when you're making the videos?
Jim
Reply With Quote
  #40  
Old 07-03-2012, 02:36 AM
Chris Botha's Avatar
Chris Botha Chris Botha is offline
Platinum
 
Join Date: Jul 2012
Location: Australia, Melbourne
Posts: 322
Default Re: Videos ~ 11 hours worth

Very well laid out thread and videos, some late night viewing in my Tabletpc..

Thank you.
__________________
Most human beings only think they want freedom. In truth they yearn for the bondage of social order, rigid laws, materialism, the only freedom man really wants, is the freedom to become comfortable. - (Sons of Anarchy)
Reply With Quote
  #41  
Old 07-03-2012, 11:22 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours

Quote:
Originally Posted by jaf50
Steve,
Just found and am browsing your site. Did you ever find the inlaying videos?
No, I didn't. They were recordered on a video tape camera which was the same one we used for making home videos of the kids. Back then I believe I accidentally taped over that gold inlay tape I had recorded earlier.


Quote:
Originally Posted by jaf50
For the larger areas that were gold inlay, are they only held in place by undercutting the edges, or do you crosshatch the inlay underlayment with a raised burr to help hold the gold, which is what I believe Meeks suggests?
I recess the area out with the nsk and also use that with a narrowed bur to undercut wotj. Out in the middle of larger sheet inlays I sometimes raised a few teeth to help make sure the center doesn't bow up. Here is a quick sketch of the inlay process.




Quote:
Originally Posted by jaf50
Your videos are a great example of the process, and like everyone else here, I'd like to thank you for putting them up. Is there a picture somewhere of your overall engraving workspace?
Thank you Jim. Here is a picture of the engraving area in the new shop.

Quote:
Originally Posted by jaf50
Looks like you work under a 'scope a lot. Or is that just when you're making the videos?
Yes, I pretty much always have engraved under the scope.

Quote:
Originally Posted by Chris Botha
Very well laid out thread and videos, some late night viewing in my Tabletpc..
Okay, great! Thank you Chris
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #42  
Old 07-04-2012, 12:49 AM
ChrisB's Avatar
ChrisB ChrisB is offline
Platinum
 
Join Date: Apr 2006
Location: Gauteng, South Africa
Posts: 586
Default Re: Videos ~ 11 hours

HA!! Now I see where You Get all the Time to Do What You Do, You Take Catnaps on that Comfy Couch Between Jobs Hey.!! LOL
__________________
ChrisBooysen
www.cbknives.com

"If you are patient in one Moment of Anger,
You will Escape a hundred Days of Sorrow."
Reply With Quote
  #43  
Old 07-04-2012, 08:18 AM
Crazy Horse's Avatar
Crazy Horse Crazy Horse is offline
Platinum
 
Join Date: May 2006
Location: Philly, PA
Posts: 302
Default Re: Videos ~ 11 hours worth

Yo Steve, what kind of engraving room is that? No clutter? No piles of books and pictures? And a couch???

You know what they say in a machine shop...."If there aren't any chips on the floor no one is working." ;~)
__________________
TOLERANCE is the virtue of a man without convictions.
Reply With Quote
  #44  
Old 07-04-2012, 12:59 PM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Default Re: Videos ~ 11 hours worth

Hi,

That is a Masters work bench with a rug ,you wont find any clutter or metal filings on the floor.
Steve has a special robot that auto cleans and rearranges everything in the whole workshop every two hours ! Only I know about it

SE


__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
Reply With Quote
  #45  
Old 07-04-2012, 03:20 PM
Willem Parel's Avatar
Willem Parel Willem Parel is offline
Platinum
 
Join Date: Jun 2009
Location: the Netherlands
Posts: 607
Default Re: Videos ~ 11 hours worth

Here is the answer guy´s.....
http://www.youtube.com/watch?v=WZuVZARfvv0
Reply With Quote
  #46  
Old 05-15-2017, 07:22 PM
MoldyJim MoldyJim is offline
Gold
 
Join Date: Oct 2015
Location: United States
Posts: 174
Default Re: Videos ~ 11 hours worth

Is this on a sticky post?
It should be.
Actually, it should be in every library in the civilized world.
Reply With Quote
  #47  
Old 05-16-2017, 12:55 AM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Default Re: Videos ~ 11 hours worth

Quote:
Originally Posted by MoldyJim View Post
Is this on a sticky post?
It should be.
Actually, it should be in every library in the civilized world.
Hi
I will second that anytime anywhere Jim.
SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
Reply With Quote
  #48  
Old 05-16-2017, 05:29 AM
Rojas_ness Rojas_ness is offline
Steel
 
Join Date: Apr 2017
Location: North Carolina
Posts: 24
Default Re: Videos ~ 11 hours worth

Been watching these while on the treadmill. Thanks for organizing them on the forum. I had to fish for consecutive videos on YouTube
Reply With Quote
  #49  
Old 05-23-2017, 11:00 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: Videos ~ 11 hours worth

Thanks guys.. Glad these videos are being helpful.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #50  
Old 08-24-2017, 03:56 AM
Eugene Zinoviev's Avatar
Eugene Zinoviev Eugene Zinoviev is offline
Steel
 
Join Date: Jan 2015
Location: Kaliningrad
Posts: 23
Default Re: Videos ~ 11 hours worth

I'll remember when I eagerly absorbed all the information. Thanks Steve.
Reply With Quote
Reply

Bookmarks


Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 05:55 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.